DMX-RELAIS 8 INRUSH
€145.95*
59 at stock.
angezeigt werden und Zahlungseingang per PayPal vorrausgesetzt.
Versand nur werktags von Montag bis Freitag (bis 13:00 Uhr) (nicht am Samstag, Sonntag und Feiertag).
Delivery time: 1-3 days
- Direct from the manufacturer
- dispatch within 24 hours
- Made in Germany
- technical support
Product information "DMX-RELAIS 8 INRUSH"
 DMX-RELAIS 8 INRUSH |
The DMX-RELAIS 8 INRUSH is designed for several control tasks.
8 potential free switching outputs
The DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (closer / NO) up to 8A switching capacity.
Switching contact for direct and alternating voltage
The relay interface is suitable to direct voltage (DC) or alternating voltage (AC).
DMX FAIL-Function
An adjustable DMX FAIL function offers the option to hold the current state (HOLD)
or to adopt a predefined value if the DMX signal fails.
RDM support
The DMX-RELAIS 8 INRUSH allows the configuration via RDM or DMX.
Free RDM software
For setting the parameters via RDM, our free RDM Configurator software
is available for download on our website www.dmx4all.de.
Lockable device settings
The RDM parameters Lock Pin and Lock State allow or prohibit changing
saved RDM parameters to prevent unauthorized changes.
SubDevice-Mode
In SubDevice mode, each output is assigned its own DMX address,
operating mode and DMX FAIL behavior via RDM.
LED-State Display
The DMX state is indicated via the LED status.
Several operation modes
The DMX-RELAIS 8 INRUSH offers several operating modes which can be set via RDM:
- Hysteresis 127/128
- Hysteresis 0/1
- Hysteresis 100/150
- Exclusive
- Monostable 1Second
Top hat rail mounting available
Suitable for the DMX-RELAIS 8 INRUSH the DIN rail housing 1050 is available as accessory.
Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation.
| Specifications |
| Power supply: | 12-24V DC |
| (280mA @ 12V / 180mA @ 24V) | |
| Protocol: | DMX512 |
| RDM | |
| DMX-Channels: | 8 DMX-channels |
| DMX-FAIL: | Hold / 0-100% |
| Operation modes: | Hysteresis 127/128 |
| Hysteresis 0/1 | |
| Hysteresis 100/150 | |
| Exclusive | |
| Monostable 1Second | |
| Output: | 8 potential-free switching output (closer / NO) |
| each max. 8A | |
| 165A@20ms Switch-on peak current | |
| Connectors: | screw terminals |
| Dimensions: | 99mm x 82mm |
| Product Downloads |
DMX4ALL GmbH
Reiterweg 2A
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de
WarningPlease note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Waste disposalElectrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
This website uses cookies to ensure the best experience possible.