DMX-Splitter 4 RDM

€154.70*

Content: 1 Stck.

10 at stock.

Das Versandversprechen gilt nur für Artikel, die im Online Shop als DMX4ALL GmbH - DMX und RDM-Technik Made in Germany

angezeigt werden und Zahlungseingang per PayPal vorrausgesetzt.
Versand nur werktags von Montag bis Donerstag (bis 13:00 Uhr) (nicht am Samstag, Sonntag und Feiertag).

Delivery time: 1-3 days

Piece

Product number: 90-0824

Manufacturer: DMX4ALL GmbH

Manufacturer product number: 90-0824

Weight: 0.2 kg

Stock: 10

Available stock: 10

Delivery time: 1-3 days

Our benefits

Direct from the manufacturer
dispatch within 24 hours
Made in Germany
technical support

Our payment methods:

Product information "DMX-Splitter 4 RDM"

DMX-Splitter 4 RDM

The DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signal
available again at four galvanically isolated outputs.

4 galvanically isolated outputs
The DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signal
available again at four galvanically isolated outputs.

DMX and RDM
In contrast to pure DMX splitters, the RDM information is passed in both
directions in addition to the DMX signal.

RDM filter
When the RDM filter is switched on, all RDM information are filtered out and no longer passed
on to the outputs. This can prevent malfunction / flickering of non-RDM-capable devices.

Settings possible via RDM
The DMX-Splitter 4 RDM is recognized as an independent RDM device and settings can be made via RDM.

Extremely light construction
Extremely light DC/DC converters are used for galvanic isolation.

Power supply via one power supply unit
The power supply occurs via one power supply unit. The voltage range is between 8V up to 24V.

RGB-LED-Display
Three RGB LEDs clearly indicate the current operating status.

Top hat rail mounting available
Suitable for the DMX-Splitter 4 RDM the DIN rail housing 700 is available as accessory.

Specifications


Power supply:	8-24V DC

Power consumption:	200mA@12V / 130mA@24V (no load)

Protocol:	DMX512
	RDM

Output:	4x DMX512 / RDM
	galvanically isolated

RDM filter:	Can be switched on / off

Connections:	screw terminals

Dimensions:	64,2mm x 82mm

Product Downloads

DMX-Splitter 4 RDM
Bedienungsanleitung
DMX-Splitter 4 RDM
User Manual

Manufacturer "DMX4ALL GmbH"

DMX4ALL GmbH
Reiterweg 2A

44869 Bochum
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de

Related links of the manufacturer

Warning

Please note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.

Waste disposal

Electrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.

We recommend the following for this product:

Module enclosure 700 for DIN-rail

Hutschienengehäuse 700Module housing for M36-DIN-standard rail. Specifications Top Material:LexanColour:grey (RAL 7035)Max. Temperature:100°CInstallation wide:70.0 mm (4 Module)Label dimensions:41.0 x 65.0 mmFlammability:in confomity with UL94-VO Base Material:norylColour:black (RAL 7021)Max. Temperaturr:100°CTerminal:max. 24Montage:DIN-standard rail (EN50022)Flammability:in conformity with UL94-VO Product DownloadsModule enclosure 700Maßzeichnung

Product number: 50-0061

Delivery time: 1-3 days

€10.91*

MEANWELL HDR-15-12 (12V/1,25A/15W)

MEANWELL HDR-15-12 (12V/1,25A/15W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Enclosed case, Touch-guard screw terminals - Universal input - Overload protection, current limiting, auto recovery - Protections: short circuit/over load/over voltage - Power-on LED display - Low no load power consumption - Manufactor: MEANWELL - Manufactor order code: HDR-15-12 Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...1,25AOutput Power:15WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:45ARated Output Power:110...145%Operating Temperature Range:-30°C to +70°CUnit Weight:78gLength/Width/Height:54.5mm/17.5mm/90mm Product DownloadsHDR-15Datasheet

Product number: 50-0121

Delivery time: 1-3 days

€22.99*

Adam Hall DMX Cable (per meter)

Adam Hall DMX-Kabel (Meterware)The Adam Hall 4 STAR D 234 is perfectly suited for transmission of DMX signals.Our classic with 2 x 0.34 mm² center conductor is also perfect for longer distances,thanks to its bigger cross-section. This highly flexible cable is easy to wind,and thanks to its larger diameter also very robust and therefore also well suitedfor hard road applications.- Adam Hall 4 Star "Standard" Series- Highly flexible, easy to reel- Good shielding thanks to dense copper spiral shielding- Larger inner conductor of 2 x 0.34 mm²- PVC jacket of 6.5 mm diameterDelivery as a section (yard goods) or 100m on a drum. Technische Daten Type:DMX & AES/EBU Cable Color:Black Overall diameter:6,5 mm AWG:22 Center conductor cross section:0,34mm² Center conductor material:OFC Number of internal conductors:2 Shield:Tin-plated copper braided shield Line surge impedance:120 Ohm Temperature range:-20 - +70°C Application:DMX Sales unit:Sold by the meter as a section or 100 meters on drum Manufacturer:Adam Hall

Product number: 10-2400

Delivery time: 1-3 days

From €1.99*

Details

Sommer Cable DMX-Cable 110 Ohm (per meter)

Sommer Cable DMX-Kabel 110 Ohm (Meterware)Das DMX-Kabel ist eine hervorragende Leitung zur Übertragung von Digitalsignalenim 110 Ω AES/EBU und DMX Datenformat. Es besitzt eine Schirmung aus einem aluminiumbedampften Vlies und einem Cu-Spiralwendelschirm mit 100 % Bedeckung.Es ist dadurch sehr gut gegen elektrische Einflüse geschüzt.Vorteile:- Optimale Schirmung durch die Verwendung eines dichten Cu-Wendelschirms + AL/PT-Folie bzw. AL-Vlies- Kompakt und dadurch platzsparendAnwendung:- Professionelle Studio- und Mikrofontechnik- Verbindung von Effektgeräten und Steuereinheiten, bei denen ein Return-Signal benötigt wird- Industrie- und Medizintechnik- Professionelle MIDI-Technik, Überspielkabel- High-End Verbindung von HiFi-Geräten- Steuerung von Licht- und Scanneranlagen und DisplaysLieferung als Abschnitt (Meterware) oder 100m auf Trommel. Technische Daten Eigenschaften:Digital 110 Ω AES / EBU OFC hochreines Kupfer Anwendung:DMX Farbe:Schwarz Signalübertragung:symmetrisch Aufbau:(2LI2Y0,22mm²)(ST)DY Bauform:Rund Durchmesser:5 mm Verkaufseinheit:Meterware als Abschnitt oder 100 Meter auf Trommel BPVo-Euroklasse:Fca Hersteller:Sommer Cable

Product number: 10-2300

Delivery time: 1-3 days

From €1.99*

Details

You might also be interested in:

DMX-Splitter 4

DMX-Splitter 4The DMX-Splitter 4 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit.The voltage range is between 8V up to 24V.Compact design for top hat rail mountingThe DMX-Splitter 4 is suitable for installation in top hat rail mountingswith a width of 7cm due to its small size.LED-DisplayTwo LEDs show clearly the current operation mode.Top hat rail mounting availableSuitable for the DMX Splitter 4 the DIN rail housing 700 is available as accessory. Specifications Power supply:8-24V DC (350mA@12V; 200mA@24V) Input:512 channels Output:4x 512 channels galvanically isolated Connections:screw terminals Dimensions:64,2mm x 82mm Product DownloadsDMX-Splitter 4Bedienungsanleitung DMX-Splitter 4User Manual

Product number: 90-0814

Delivery time: 1-3 days

€98.75*

DMX-Splitter 4 RDM+

DMX-Splitter 4 RDM+The DMX-Splitter 4 RDM+ is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 RDM+ is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.DMX and RDMIn contrast to pure DMX splitters, the RDM information is passed in bothdirections in addition to the DMX signal.RDM filterWhen the RDM filter is switched on, all RDM information are filtered out and no longer passedon to the outputs. This can prevent malfunction / flickering of non-RDM-capable devices.Settings possible via RDMThe DMX-Splitter 4 RDM is recognized as an independent RDM device and settings can be made via RDM.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit. The voltage range is between 8V up to 24V.3 RGB-LEDsThree RGB LEDs clearly indicate the current operating status.Touch-ControlThe DMX-Splitter 4 RDM+ has an integrated touch control field to turn on/off the RDM filter. Switchable LED-DisplayThe LED-Display at the DMX-Splitter 4 RDM+ can be switched off via RDM command or time-controlled,so that no disturbing light sources are present during operation. Specifications Power supply:8-24V DC Power consumption:200mA@12V / 130mA@24V (no load) Protocol:DMX512 RDM Input:1x DMX512 / RDM Output:4x DMX512 / RDM galvanically isolated RDM filter:Can be switched on / off TOUCH-Control:1 sensor button directly on the device and 3 RGB status LEDs Connections:screw terminals Dimensions:70mm x 90mm x 60mm Product DownloadsDMX-Splitter 4 RDM+Bedienungsanleitung DMX-Splitter 4 RDM+User Manual

Product number: 99-0824

Delivery time: 1-3 days

€227.05*

DMX-Splitter 6

DMX-Splitter 6The DMX-Splitter 6 is a compact DMX-Divider with one DMX-Input signal which providesthese at six galvanically isolated outputs.6 galvanically isolated outputsThe DMX-Splitter 6 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit.The voltage range is between 8V up to 24V.Compact design for top hat rail mountingThe DMX-Splitter 6 is suitable for installation in top hat rail mountingswith a width of 10,5cm due to its small size.LED-DisplayA multicolor LED clearly indicates the current operating status.Top hat rail mounting availableSuitable for the DMX Splitter 6 the DIN rail housing 1050 is available as accessory. Specifications Power supply:8-24V DC (350mA@12V; 200mA@24V) Input:512 channels Output:6x 512 channels galvanically isolated Status Display:Multi-color LED Connections:screw terminals Dimensions:99mm x 82mm Product DownloadsDMX-Splitter 6Bedienungsanleitung DMX-Splitter 6User Manual

Product number: 90-0816

Delivery time: 1-3 days

€149.99*

DMX-Splitter 6+

DMX-Splitter 6+The DMX-Splitter 6+ is a compact DMX-Divider with one DMX-Input signal which providesthese at six galvanically isolated outputs.6 galvanically isolated outputsThe DMX-Splitter 6+ is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit.The voltage range is between 8V up to 24V.Compact design for top hat rail mountingDue to its small size, the DMX Splitter 6+ is suitable for installationon DIN rails with a width of 10.5 cm.LED-DisplayA multicolor LED clearly indicates the current operating status. Specifications Power supply:8-24V DC (350mA@12V; 200mA@24V) Input:512 channels Output:6x 512 channels galvanically isolated Status Display:Multi-color LED Connections:screw terminals Dimensions:105mm x 90mm x 60mm Product DownloadsDMX-Splitter 6+Bedienungsanleitung DMX-Splitter 6+User Manual

Product number: 99-0816

Delivery time: 1-3 days

€209.49*

Tools & Equipment:

WAGO 221-2411 Through Connector

WAGO 221-2411 DurchgangsverbinderWith the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The 1-way through connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Number of poles:1 Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-2411 Manufactor:WAGO

Product number: 00-0690

Delivery time: 1-3 days

€0.60*

WAGO 221-412 Connection Terminal 2

WAGO 221-412 Verbindungsklemme 2With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:2 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-412 Manufactor:WAGO

Product number: 00-0691

Delivery time: 1-3 days

€0.89*

WAGO 221-412 Connection Terminal 3

WAGO 221-413 Verbindungsklemme 3With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:3 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-413 Manufactor:WAGO

Product number: 00-0692

Delivery time: 1-3 days

€1.37*

WAGO 221-412 Connection Terminal 5

WAGO 221-415 Verbindungsklemme 5With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:5 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-415 Manufactor:WAGO

Product number: 00-0693

Delivery time: 1-3 days

€1.67*

WAGO 221-500 Fastening Adapter

WAGO 221-500 BefestigungsadapterWith the 221 series, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The mounting carrier is suitable for 2-, 3- and 5-conductor 221 Series Splicing Connectors (4 mm²). Specifications Type:Mounting carrier Suitable:for 2-, 3- and 5-conductor 221 Series Splicing Connectors Mounting type:DIN-35 rail Screw mount Color:Orange Part number:221-500 Manufactor:WAGO

Product number: 00-0699

Delivery time: 1-3 days

€1.19*