NanoDMX USB InterfaceThe NanoDMX USB Interface is an "adapter-cable" which allows an easy controlling of DMX-capable devices via PC.By using the USB-port no power supply is neccessary.Each interface is equipped with a micro-controller serving the values for all 512 channels andgenerating a DMX-signal without loading the PC.To run this NanoDMX USB Interface with an existing software a virtual COM-Port will be applied.This allows that the data transfer takes place such by using a conventionally serial interface.This interface will be supported inter alia:DMX-ConfiguratorFreeStyler (3rd Generation interface)DMXControl V2PC_DimmerIP-SymconTLC (Theater Light Control)Light@NightVVVVMagicQLumiDMX Specifications  Voltage power:5V / 250mA over USBPC Connection:USB 1.1 / USB 2.0DMX Output:512 channels fast mode: 44 frames/sec slow mode: 33 frames/secConnection:3 pin XLR-female connectorCable length:ca. 1mUSB-Driver:CDC-driver (virtual Com Port)Operation system:Windows 7, Windows 8/8.1 Product DownloadsNanoDMX USB InterfaceBedienungsanleitung NanoDMX USB InterfaceUser Manual NanoDMX USB InterfaceUSB Driver Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Devolopment

 USB-DMX STAGE-PROFI MK2 XLR3The USB-DMX STAGE-PROFI MK2 is designed for the rough stage environment.Housed in an aluminium housing with a Neutrik-XLR-female and screwable USB-und connecting-malethis interface offers all you need in a robust opeartion.The galvanic isolated DMX-output protects against dangerous electrical signals on the DMX-Bus.An external power supply during the operation is not necessarybecause the USB-interface can be used as power supply.To run this USB-DMX STAGE-PROFI MK2 Interface with existing softwarea virtual COM-Port applied in the system is needed.This allows a data transfer as well as the usage of a conventionally serial interface.Alternatively a direct access to the USB-driver from the user software is possible.Special features of the version USB-DMX STAGE-PROFI MK2:Galvanically isolated DMX-outputAluminium housingNeutrik XLR-feamle 3 pinScrewable USB connectionStandAlone function for replaying the light scenes without PC8k Byte memory for the StandAlone-light sceneThis interface will be supportet iuter alia: DMX-ConfiguratorFreeStyler (2nd Generation interface)DMXControl (Version2)PC_DimmerIP-SymconTLC (Theater Light Control)Light@NightVVVVMagicQ Specifications  Power supply:5V / 500mA via USB  PC-connection:USB 1.1 / USB 2.0  DMX-output:512 channels galvanicallly isolated DMX output 3 pin XLR-female  Dimensions:32mm x 27mm x 90mm  USB-driver:FTDI D2XX & VCP (virtaul COM-Port)  Operating system:Windows® 7,Windows® 8 Product DownloadsUSB-DMX STAGE-PROFI MK2Bedienungsanleitung USB-DMX STAGE-PROFI MK2User Manual USB-DMX STAGE-PROFI MK2USB Driver Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Devolopment

 USB-DMX STAGE-PROFI MK2 XLR5The USB-DMX STAGE-PROFI MK2 Interface is designed for the rough stage environment.Housed in an aluminium housing with a Neutrik-XLR-female and screwable USB-und connecting-male this interface offers all you need in a robust opeartion.The galvanic isolated DMX-output protects against dangerous electrical signals on the DMX-Bus. An external power supply during the operation is not necessarybecause the USB-interface can be used as power supply. To run this USB-DMX STAGE-PROFI MK2 Interface with existing softwarea virtual COM-Port applied in the system is needed.This allows a data transfer as well as the usage of a conventionally serial interface.Alternatively a direct access to the USB-driver from the user software is possible.Special features of the version USB-DMX STAGE-PROFI MK2:Galvanically isolated DMX-outputAluminium housingNeutrik XLR-feamle 5 pinScrewable USB connectionStandAlone function for replaying the light scenes without PC8k Byte memory for the StandAlone-light sceneThis interface will be supportet iuter alia: DMX-ConfiguratorFreeStyler (2nd Generation interface)DMXControl (Version2)PC_DimmerIP-SymconTLC (Theater Light Control)Light@NightVVVVMagicQ Specifications  Power supply:5V / 500mA via USB  PC-connection:USB 1.1 / USB 2.0  DMX-output:512 channels galvanicallly isolated DMX output 5 pin XLR-female  Dimensions:32x27x90 mm  USB-driver:FTDI D2XX & VCP (virtaul COM-Port)  Operating system:Windows® 7,Windows® 8 Product DownloadsUSB-DMX STAGE-PROFI MK2Bedienungsanleitung USB-DMX STAGE-PROFI MK2User Manual USB-DMX STAGE-PROFI MK2USB Driver Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Devolopment

 DMX UNIVERSE DR1.1 RDMThe DMX UNIVERSE DR1.1 RDM is a compact bidirectional Ethernet Gateway whichcan be used for Art-Net™/TPM2/sACN to DMX/RDM or DMX to Art-Net™.With a standard RJ45 network connector the connection to the ArtNet is made.DMX direction selectableThe DMX direction can be switched depending on use.Adjustable DMX-FramerateIn DMX OUTPUT mode, the DMX framerate is adjustable so that this interface is compatible with "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™, which enables connected RDM devices to be configured via Art-Net™ with the appropriate software.Free RDM-SoftwareTo set parameters via RDM our free software RDM-Configurator is available as download on our website www.dmx4all.de .Muteable LED indicatorThe LED indicators on the DMX UNIVERSE DR1.1 RDM are muteable by Art-Net™ command (AcLedMute) or time-controlled.This is helpful to disturbing "points of light" especially on stages.DHCPThe DMX UNIVERSE DR1.1 RDM has a DHCP function for automatic addressing in the network.Internal stand-alone programs The internal programs make the DMX UNIVERSE DR1.1 RDM a stand-alone device. The programs can be calledup via the web interface, when the device is switched on, or when Art-Net™ data is missing.Easy Webbrowser-ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.DMX-Monitor The DMX monitor is available via the web interface. This means that the current DMX valuescan be displayed and checked simultaneously without any additional software.DMX-Fader The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.Easy Network ConfigurationFor easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.Compact designThe DMX UNIVERSE DR1.1 RDM is designed for mounting in a 350mm DIN rail housing.Use together with WiFi componentsIn conjunction with a WiFi-bridge the DMX UNIVERSE DR1.1 RDM can be integrated into standard WiFi networks.Firmware-Update-FunctionIn order to take advantage of future features, the DMX UNIVERSE DR1.1 RDM has a firmware update function.This can be launched from the browser so that no access to the device is necessary!DMX4ALL-Command interfaceThe DMX UNIVERSE DR1.1 RDM has another communication interface that is compatible withthe LAN-DMX STAGE-PROFI. This interface uses the DMX4ALL commands via TCP or UDP packets. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (150mA@12V; 100mA@24V)  Connection:Ethernet: RJ45 Power/DMX: Screw terminal  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable (5 - 44 fps)  RDM:RDM via Art-Net™  Data Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM  DMX-IN Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES  Protocol:Art-Net™ TPM2 sACN (Unicast) DMX4ALL commands (as well as the LAN-DMX STAGE-PROFI)  Internal program:User-configurable stand-alone program  Status LED:Green: Ethernet Connection Yellow: Datatransfer  Dimensions:29,2mm x 82mm Product DownloadsDMX UNIVERSE DR1.1 RDMBedienungsanleitung DMX UNIVERSE DR1.1 RDMUser Manual DMX UNIVERSE DR1.1 RDMEthernet VCP Driver 32 & 64bit - Version 1.10 DMX UNIVERSE DR1.1 RDMFirmware DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 DMX TwinPOE AP RDMThe DMX TwinPOE AP RDM is a compact ethernet interface (DMX via Ethernet),which can be used for Art-Net™/TPM2/sACN to DMX/RDM or DMX to Art-Net™.Two galvanically separated DMX UniversesThe DMX TwinPOE AP RDM offers two separated DMX connections which can be used as DMX-OUT or DMX-IN.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devicesto be configured via Art-Net™ using corresponding software.Multi-color LED displayThe LED-Display at the DMX TwinPOE AP RDM can be switched off via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.LSA-PLUS Quick connection technologyThe LSA insulation displacement technology allows the individual wires to beattached quickly (e.g. for network installation cables).Easy ConfigurationA user-friendly configuration via web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible any time from PC, Smartphone or tablet. Compact designThe DMX TwinPOE AP RDM with a size of 66mm x 66mm is suitable forinstallation in the optionally available wall-mounted housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Firmware-Update-FunctionTo be able to use future functions, DMX TwinPOE AP RDM offers a firmware update function.This can be started from the web browser, so no access to the device is necessary!DMX4ALL communication interfaceThe DMX TwinPOE AP RDM has an additional communication interface that uses DMX4ALL commands via TCP or UDP.Surface housing availableA surface-mounted housing suitable for the DMX TwinPOE AP RDM is available as an accessory. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:PoE with IEEE 802.af or 8-48V DC (200mA@12V; 110mA@24V; 65mA@48V)  Connection:Ethernet: LSA-PLUS connection Power: Screw terminals DMX: Pin header RM2,54  DMX:adjustable each DMX connection: - 512 channels OUT - 512 channels IN  DMX-Framerate:adjustable (5 - 44 fps)  RDMRDM via Art-Net™ on-/off switchable  DATA FAIL (DMX-OUT):HOLD last data CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM  DMX-IN FAIL (DMX-IN):NO DATA HOLD last data CLEAR all to 0% SET all to 100%  Protocol:Art-Net™ TPM2 sACN (Unicast) DMX4ALL commands  Internal program:User configurable Stand-Alone program  LED-Display:Multi-Color-LED (RGB)  Dimensions:66mm x 66mm Product DownloadsDMX TwinPOE AP RDMBedienungsanleitung DMX TwinPOE AP RDMUser Manual DMX TwinPOE AP RDMEthernet VCP Driver 32 & 64bit - Version 1.10 DMX TwinPOE AP RDMFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 DMX STAGE-PROFI 1.1 RDM (XLR3)The DMX STAGE-PROFI 1.1 RDM is a compact bidirectional Ethernet Gateway (DMX via Ethernet), whichcan be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.Via a standard RJ45 net work connection the connection to ethernet net work occurs.Switchable DMX directionThe DMX direction can be switched according to usage.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devices to be configured via Art-Net™ using corresponding software.Muteable LED displayThe LED-Display at the DMX STAGE-PROFI 1.1 RDM is disengageable via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.DHCPThe DMX STAGE-PROFI 1.1 RDM has a DHCP function for automatic addressing in the network.Internal stand-alone programs The internal programs make the DMX STAGE-PROFI 1.1 RDM a stand-alone device. The programs can be calledup via the web interface, when the device is switched on, or when Art-Net™ data is missing.Easy ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.DMX-Monitor The DMX monitor is available via the web interface. This means that the current DMX valuescan be displayed and checked simultaneously without any additional software.DMX-Fader The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.Easy Network ConfigurationFor easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.High quality and Compact DesignThe DMX STAGE-PROFI 1.1 RDM is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Combinable with WiFi componentsIn combination with a WLAN bridge the DMX STAGE-PROFI 1.1 RDM can also be integrated into WLAN net works.Firmware update functionTo use future functions the DMX STAGE-PROFI 1.1 RDM offers a Firmware-Update-Function.This can be started with any web browser, so no direct access to the device is necessary!DMX4ALL Communication-InterfaceThe DMX STAGE-PROFI 1.1 RDM has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:5V DC via attached external power supply  Connection:RJ45 Ethernet USB Mini-B Neutrik® XLR3  Ethernet:10 Mbit/s | 100 Mbit/s  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable (5 - 44 fps)  RDM:RDM via Art-Net™ (switchable on/off)  ArtDmx Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAMDMX Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES  Protocol:Art-Net™ (downwards compatiblel) Ethernet-VCP (Virtual COM Port) USB-VCP (Virtual COM Port) TPM2 sACN (Unicast) DMX4ALL-Commands via TCP, UDP, VCP  Internal program:User-configurable stand-alone program  Status LED:Green: Ethernet Connection Yellow: Datatransfer  Dimensions:75mm x 26mm x 35 mm Produkt DownloadsDMX STAGE-PROFI 1.1 RDM (XLR3)Bedienungsanleitung DMX STAGE-PROFI 1.1 RDM (XLR3)User Manual DMX STAGE-PROFI 1.1 RDM (XLR3)Ethernet VCP Driver 32 & 64bit - Version 1.10 DMX STAGE-PROFI 1.1 RDM (XLR3)USB VCP Driver 32 & 64bit - Version 42.0.1.0 DMX STAGE-PROFI 1.1 RDM (XLR3)Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 DMX STAGE-PROFI 1.1 RDM (XLR5)The DMX STAGE-PROFI 1.1 RDM is a compact bidirectional Ethernet Gateway (DMX via Ethernet), whichcan be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.Via a standard RJ45 net work connection the connection to ethernet net work occurs.Switchable DMX directionThe DMX direction can be switched according to usage.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devices to be configured via Art-Net™ using corresponding software.Muteable LED displayThe LED-Display at the DMX STAGE-PROFI 1.1 RDM is disengageable via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.DHCPThe DMX STAGE-PROFI 1.1 RDM has a DHCP function for automatic addressing in the network.Internal stand-alone programs The internal programs make the DMX STAGE-PROFI 1.1 RDM a stand-alone device. The programs can be calledup via the web interface, when the device is switched on, or when Art-Net™ data is missing.Easy ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.DMX-Monitor The DMX monitor is available via the web interface. This means that the current DMX valuescan be displayed and checked simultaneously without any additional software.DMX-Fader The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.Easy Network ConfigurationFor easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.High quality and Compact DesignThe DMX STAGE-PROFI 1.1 RDM is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Combinable with WiFi componentsIn combination with a WLAN bridge the DMX STAGE-PROFI 1.1 RDM can also be integrated into WLAN net works.Firmware update functionTo use future functions the DMX STAGE-PROFI 1.1 RDM offers a Firmware-Update-Function.This can be started with any web browser, so no direct access to the device is necessary!DMX4ALL Communication-InterfaceThe DMX STAGE-PROFI 1.1 RDM has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:5V DC via attached external power supply  Connection:RJ45 Ethernet USB Mini-B Neutrik® XLR5  Ethernet:10 Mbit/s | 100 Mbit/s  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable (5 - 44 fps)  RDM:RDM via Art-Net™ (switchable on/off)  ArtDmx Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM  DMX Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES  Protocol:Art-Net™ (downwards compatiblel) Ethernet-VCP (Virtual COM Port) USB-VCP (Virtual COM Port) TPM2 sACN (Unicast) DMX4ALL-Commands via TCP, UDP, VCP  Internal program:User-configurable stand-alone program  Status LED:Green: Ethernet Connection Yellow: Datatransfer  Dimensions:75mm x 26mm x 35 mm Produkt DownloadsDMX STAGE-PROFI 1.1 RDM (XLR5)Bedienungsanleitung DMX STAGE-PROFI 1.1 RDM (XLR5)User Manual DMX STAGE-PROFI 1.1 RDM (XLR5)Ethernet VCP Driver 32 & 64bit - Version 1.10 DMX STAGE-PROFI 1.1 RDM (XLR5)USB VCP Driver 32 & 64bit - Version 42.0.1.0 DMX STAGE-PROFI 1.1 RDM (XLR5)Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 Wireless ArtNet-DMX 1.1The Wireless ArtNet-DMX 1.1 is a compact Art-Net (DMX via Ethernet) interface whichincludes a modern ARM® microcontroller.Additional the Wireless ArtNet-DMX 1.1 has a certified 2.4GHz 802.11 b/g/n Wi-Fi (FCC, CE, IC, and TELEC)for a direct connection to a Wi-Fi network.Switchable DMX-lineThe DMX-line is switchable according to usage. So Art-Net can be realized to DMX or DMX to Art-Net.Adjustable DMX-Frame rateWithin the DMX-OUTPUT-MODE the frame rate is adjustable, so this interface is compatible to “slow” DMX-Devices.Art-Net Merge-FunctionTwo Art-Net-sources will be joined outputted via LTP (Latest) or http (Highest) to the DMX-Output.Switched off LEDThe LEDs at the Wireless ArtNet-DMX 1.1 are suppressible via ArtNet-Command (AcLedMute) or time-controlled.This is helpful on stages to avoid disturbing “light points”.Fast launch with WPSWith the WPS-Function the registration to an Access-Point is possible at the touch of a button.Without an additional installation of encodings, controllings can be integrated in existing networksand allows an easy possibility of usage without additional network activities.Easy ConfigurationFor an easy IP-Setting we provide free the IP-Configurator as PC-Tool or Android-App.Supports IEEE 802.11 WEP/WPA/WPA2For a secure Wi-Fi connection it is possible to use WEP/WPA/WPA2.A OPEN connection is also possible.High-quality and compact performanceThe Wireless ArtNet-DMX 1.1 is built in compact aluminium housing.Firmware-Update-FunctionTo use prospective and further functions the Wireless ArtNet-DMX 1.1provides an integrated Firmware-Update-Function. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd Specifications  Power supply:5V/1A DC via included power supply or 5-12V/1A via screw terminals  Connection:2.4GHz 802.11 b/g/n Wi-Fi (FCC, CE, IC, and TELEC)  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable  Protocol:Art-Net ™  Dimensions:100 x 55 x 25 mm (without antenna) Product DownloadsWireless ArtNet-DMX 1.1Bedienungsanleitung Wireless ArtNet-DMX 1.1User Manual Wireless ArtNet-DMX 1.1USB Driver Wireless ArtNet-DMX 1.1Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 DMX STAGE-PROFI 1.1 PoE (XLR3)The DMX STAGE-PROFI 1.1 PoE is a compact bidirectional Ethernet Gateway (DMX via Ethernet), whichcan be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.Via a standard RJ45 net work connection the connection to ethernet net work occurs.Switchable DMX directionThe DMX direction can be switched according to usage.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected PoE devices to be configured via Art-Net™ using corresponding software.Muteable LED DisplayThe LED-Display at the DMX STAGE-PROFI 1.1 PoE is disengageable via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.Easy Webbrowser-ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.DMX-Monitor The DMX monitor is available via the web interface. This means that the current DMX valuescan be displayed and checked simultaneously without any additional software.DMX-Fader The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.Easy Network ConfigurationFor easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.High quality and Compact DesignThe DMX STAGE-PROFI 1.1 PoE is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Combinable with WiFi componentsIn combination with a WLAN bridge the DMX STAGE-PROFI 1.1 PoE can also be integrated into WLAN net works.Firmware update functionTo use future functions the DMX STAGE-PROFI 1.1 PoE offers a Firmware-Update-Function.This can be started with any web browser, so no direct access to the device is necessary!DMX4ALL Communication-InterfaceThe DMX STAGE-PROFI 1.1 PoE has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:PoE according to IEEE 802.af   or 5V DC via attached external power supplyConnection:RJ45 Ethernet USB Mini-B Neutrik® XLR3  Ethernet:10 Mbit/s | 100 Mbit/s DHCP PoE  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable (5 - 44 fps)  RDM:RDM via Art-Net™ (switchable on/off)  ArtDmx Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM  DMX Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES  Protocol:Art-Net™ (downwards compatiblel) Ethernet-VCP (Virtual COM Port) USB-VCP (Virtual COM Port) TPM2 sACN (Unicast) DMX4ALL-Commands via TCP, UDP, VCP  Internal programs:User-configurable stand-alone programs  Status LED:Green: Ethernet Connection Yellow: Datatransfer  Dimensions:75mm x 26mm x 35 mm Produkt DownloadsDMX STAGE-PROFI 1.1 PoEBedienungsanleitung DMX STAGE-PROFI 1.1 PoEUser Manual DMX STAGE-PROFI 1.1 PoEEthernet VCP Driver 32 & 64bit - Version 1.10 DMX STAGE-PROFI 1.1 PoEUSB VCP Driver 32 & 64bit - Version 42.0.1.0 DMX STAGE-PROFI 1.1 PoEFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 ArtNet-DMX-Universe DR 4.1Das ArtNet-DMX-UNIVERSE DR 4.1 ist ein kompaktes ArtNet (DMX über Ethernet) Interfacewelches über 4x DMX-Ausgänge und 1x DMX-Eingang verfügt.Alle DMX-Ausgänge sind galvanisch getrennt und können gleichzeitig mit dem DMX-Eingang verwendet werden.Über einen standard RJ45-Netzwerkanschluß erfolgt die Verbindung zum ArtNet-Netzwerk.Einstellbare DMX-FramerateIm DMX-OUTPUT-Mode ist auch die DMX-Framerate einstellbar so das dieses Interface zu "langsamen" DMX-Geräten kompatibel ist.ArtNet Merge-FunktionZwei ArtNet-Quellen werden per LTP (Latest) oder HTP (Highest) auf den DMX-Ausgang zusammengeführt ausgegeben.Abschaltbare LED-AnzeigenDie LED-Anzeigen am ArtNet-DMX-UNIVERSE DR 4.1 sind per ArtNet-Command (AcLedMute) oder zeitgesteuert abschaltbar.Dieses ist vor allem auf Bühnen hilfreich um störende "Lichtpunkte" zu vermeiden.Einfache KonfigurationEine benutzerfreundliche Konfiguration über einen Webbrowser ermöglicht eine schnelle und unkomplizierte Einstellung aller Parameter.Es wird keine spezielle Software benötigt, ein normaler Webbrowser reicht aus.So ist die Konfiguration jederzeit vom PC, Smartphone oder Tablet aus möglich.Zur einfachen Einstellung der IP stellen wir den IP-Configurator als PC-Tool oder Android-App kostenlos zur Verfügung.Damit können Sie die Netztwerkeinstellungen unverändert lassen und können so die IP problemlos konfigurieren.Kompakte AusführungDas ArtNet-DMX-UNIVERSE DR 4.1 ist für die Montage im Hutschienengehäuse mit einer 700mm vorgesehen.Kombinierbar mit WiFi-Komponenten In Verbindung mit einer WLAN-Bridge kann das ArtNet-DMX-UNIVERSE DR 4.1 auch in WLAN-Netze integriert werden.Als WLAN-Bridge empfehlen wir: TP-Link MiniRouter TL-WR702N oder TP-Link Nano Router TL-WR802NFirmware-Update-FunktionUm zukünftige Funktionen nutzen zu können bietet das ArtNet-DMX-UNIVERSE DR 4.1 eine Firmware-Update-Funktion.Diese kann vom Webbrowser gestartet werden so das kein Zugriff auf das Gerät notwendig ist! Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:7-24V / 1A  Connection:RJ45 Ethernet  DMX input:512 channels Connection via screw terminals  DMX output:4 x 512 channels or4x 1024 channels in the Extension Mode Connection via screw terminals All outputs are galvanically isolated  Dimensions:64,2 x 82 mm  Protocol:Art-Net ™ Product DownloadsArtNet-DMX-UNIVERSE DR 4.1Bedienungsanleitung ArtNet-DMX-UNIVERSE DR 4.1User Manual ArtNet-DMX-UNIVERSE DR 4.1Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 DMX STAGE-PROFI 1.1 PoE (XLR5)The DMX STAGE-PROFI 1.1 PoE is a compact bidirectional Ethernet Gateway (DMX via Ethernet), whichcan be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.Via a standard RJ45 net work connection the connection to ethernet net work occurs.Switchable DMX directionThe DMX direction can be switched according to usage.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected PoE devices to be configured via Art-Net™ using corresponding software.Disengageable LED displayThe LED-Display at the DMX STAGE-PROFI 1.1 PoE is disengageable via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.Easy Webbrowser-ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.DMX-Monitor The DMX monitor is available via the web interface. This means that the current DMX valuescan be displayed and checked simultaneously without any additional software.DMX-Fader The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.Easy Network ConfigurationFor easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.High quality and Compact DesignThe DMX STAGE-PROFI 1.1 PoE is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Combinable with WiFi componentsIn combination with a WLAN bridge the DMX STAGE-PROFI 1.1 PoE can also be integrated into WLAN net works.Firmware update functionTo use future functions the DMX STAGE-PROFI 1.1 PoE offers a Firmware-Update-Function.This can be started with any web browser, so no direct access to the device is necessary!DMX4ALL Communication-InterfaceThe DMX STAGE-PROFI 1.1 PoE has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:PoE according to IEEE 802.af   or 5V DC via attached external power supplyConnection:RJ45 Ethernet USB Mini-B Neutrik® XLR3  Ethernet:10 Mbit/s | 100 Mbit/s DHCP PoE  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable (5 - 44 fps)  RDM:RDM via Art-Net™ (switchable on/off)  ArtDmx Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM  DMX Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES  Protocol:Art-Net™ (downwards compatiblel) Ethernet-VCP (Virtual COM Port) USB-VCP (Virtual COM Port) TPM2 sACN (Unicast) DMX4ALL-Commands via TCP, UDP, VCP  Internal programs:User-configurable stand-alone programs  Status LED:Green: Ethernet Connection Yellow: Datatransfer  Dimensions:75mm x 26mm x 35 mm Produkt DownloadsDMX STAGE-PROFI 1.1 PoEBedienungsanleitung DMX STAGE-PROFI 1.1 PoEUser Manual DMX STAGE-PROFI 1.1 PoEEthernet VCP Driver 32 & 64bit - Version 1.10 DMX STAGE-PROFI 1.1 PoEUSB VCP Driver 32 & 64bit - Version 42.0.1.0 DMX STAGE-PROFI 1.1 PoEFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 DMX UNIVERSE DR6 RDMThe DMX UNIVERSE DR6 RDM is an Ethernet to DMX gateway with up to 6 bidirectionalDMX universes (DMX over Ethernet) and RDM functionality.6 DMX portsThe DMX UNIVERSE DR6 RDM offers 6 bidirectional DMX ports to which the DMX/RDM devices can be connected.The individual DMX ports can be configured independently.Galvanically decoupled DMX connectionsAll 6 DMX connections are each designed with their own galvanic isolation.Art-Net™ to DMX / DMX to Art-Net™The DMX direction can be switched per DMX port, depending on the usage.Adjustable FAIL functionEach DMX port offers a configurable FAIL function. This specifies the behavior if DMX or ArtNet data is missing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devices to be configured via Art-Net™ using corresponding software.Synchronous DMX outputThe DMX output is synchronized by receiving ArtSync packets.RGB status displayThe RGB status display clearly shows the device status.Muteable LED displayThe LED-Display at the DMX UNIVERSE DR6 RDM is muteable via Art-Net™-Command (AcLedMute) ortime controlled. This is very helpful to avoid disturbing “light points” on stage.Easy Webbrowser-ConfigurationA user friendly configuration via web browser allows a fast and uncomplicated setting of all parameters.No special software is necessary, a standard web browser is enough. So, the configuration is possible anytime from PC, Smartphone or tablet.DMX-MonitorThe DMX monitor is available via the web interface. This means that the current DMX values can be displayedand checked simultaneously without any additional software.DMX-FaderThe DMX fader is available via the web interface. This allows the DMX values to be outputto be set without additional software.DHCPThe DMX UNIVERSE DR6 RDM has a DHCP function for automatic addressing in the network.Easy Network ConfigurationFor an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The net work settings can be leaved unchanged and the IP can be configured without any problems.Combinable with WiFi componentsIn combination with a WLAN bridge the DMX UNIVERSE DR6 RDM can also be integrated into WLAN net works.Firmware update functionTo use future functions the DMX UNIVERSE DR6 RDM offers a Firmware-Update-Function.This can be started with any web browser, so no direct access to the device is necessary!DMX4ALL Communication-InterfaceThe DMX UNIVERSE DR6 RDM has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX UNIVERSE DR6 RDM and thereforeideally suited for switch cabinet installation. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (150mA@12V; 100mA@24V)  Connection:Ethernet: RJ45 Power: Screw terminal DMX: Screw terminal  DMX:6 galvanically isolated ports each 512 channels OUT or 512 channels IN  RDM:RDM via Art-Net™  Data Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT  DMX-IN Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT  Protocol:Art-Net™ sACN (Unicast) DMX4ALL Commands  Status LED:Ethernet-Status (Green / Yellow) Device-Status (RGB)  Dimensions:99mm x 82mm Product DownloadsDMX UNIVERSE DR6 RDMBedienungsanleitung DMX UNIVERSE DR6 RDMUser Manual DMX UNIVERSE DR6 RDMFirmware DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 DMX UNIVERSE DR6 RDM+The DMX UNIVERSE DR6 RDM+ is an Ethernet to DMX gateway with up to 6 bidirectionalDMX universes (DMX over Ethernet) and RDM functionality.6 DMX portsThe DMX UNIVERSE DR6 RDM+ offers 6 bidirectional DMX ports to which the DMX/RDM devices can be connected.The individual DMX ports can be configured independently.Galvanically decoupled DMX connectionsAll 6 DMX connections are each designed with their own galvanic isolation.Art-Net™ to DMX / DMX to Art-Net™The DMX direction can be switched per DMX port, depending on the usage.Adjustable FAIL functionEach DMX port offers a configurable FAIL function. This specifies the behavior if DMX or ArtNet data is missing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devices to be configured via Art-Net™ using corresponding software.Synchronous DMX outputThe DMX output is synchronized by receiving ArtSync packets.RGB status displayThe RGB status display clearly shows the device status.RGB status display for DMX and RDMFor each DMX port, the DMX and RDM status is clearly displayed using RGB displays.Muteable LED displayThe LED-Display at the DMX UNIVERSE DR6 RDM+ is muteable via Art-Net™-Command (AcLedMute) ortime controlled. This is very helpful to avoid disturbing “light points” on stage.Easy Webbrowser-ConfigurationA user friendly configuration via web browser allows a fast and uncomplicated setting of all parameters.No special software is necessary, a standard web browser is enough. So, the configuration is possible anytime from PC, Smartphone or tablet.DMX-MonitorThe DMX monitor is available via the web interface. This means that the current DMX values can be displayedand checked simultaneously without any additional software.DMX-FaderThe DMX fader is available via the web interface. This allows the DMX values to be outputto be set without additional software.DHCPThe DMX UNIVERSE DR6 RDM+ has a DHCP function for automatic addressing in the network.Easy Network ConfigurationFor an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The net work settings can be leaved unchanged and the IP can be configured without any problems.Combinable with WiFi componentsIn combination with a WLAN bridge the DMX UNIVERSE DR6 RDM+ can also be integrated into WLAN net works.Firmware update functionTo use future functions the DMX UNIVERSE DR6 RDM+ offers a Firmware-Update-Function.This can be started with any web browser, so no direct access to the device is necessary!DMX4ALL Communication-InterfaceThe DMX UNIVERSE DR6 RDM+ has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages.For DIN Rail MountingThe design in a DIN rail housing with a width of 10.5cm / 6TE makes it easy to install in a control cabinet. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (150mA@12V; 100mA@24V)  Connection:Ethernet: RJ45 Power: Screw terminal DMX: Screw terminal  DMX:6 galvanically isolated ports each 512 channels OUT or 512 channels IN  RDM:RDM via Art-Net™  Data Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT  DMX-IN Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT  Protocol:Art-Net™ sACN (Unicast) DMX4ALL Commands  Status LED:Ethernet-Status (Green / Yellow) Device-Status (1x RGB) DMX-Status (6x RGB) RDM-Status (6x RGB)  Dimensions:105mm x 90mm x 60mm Product DownloadsDMX UNIVERSE DR6 RDM+Bedienungsanleitung DMX UNIVERSE DR6 RDM+User Manual DMX UNIVERSE DR6 RDM+Firmware DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual