DMX-RELAIS 2The DMX-RELAIS 2 is designed for switching loads of several kinds.Two potential free switching outputs2 potential free switching outputs up to 8A switching capacity are available.Switch per relayThe switching contacts are designed as changeover switches and can switch resistive loads.Switching contact for direct and alternating voltageThe version is suitable to switch resistive loads using direct voltage (DC) oralternating voltage (AC).For voltages from 12V up to 24VThe DMX-Relais 2 works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 the DIN rail housing 700 is available as accessory. Specifications  Power supply:12-24V DC / 250mA (150mA@12V / 100mA@24V)  Protokoll:DMX512 RDM  DMX-Channels:1 or 2 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl  Output:2 potential free switching contacts DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph  Connectors:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2Bedienungsanleitung DMX-RELAIS 2User Manual

 DMX-RELAIS 2 INRUSHThe DMX-RELAIS 2 INRUSH is designed for several control tasks.Two potential free switching outputs2 potential free switching outputs (closer / NO)up to 8A switching capacity are available.Switching contact for direct and alternating voltageThe INRUSH version is suitable for control direct or alternating voltage.For voltages from 12V up to 24VThe DMX-Relais 2 INRUSH works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 INRUSH offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 INRUSH the DIN rail housing 700 is available as accessory. Specifications  Power supply:12-24V DC 150mA@12V / 100mA@24V  Protocol:DMX512 RDM  DMX channels:1 or 2 channels  Output:2 switching contacts (165A/20ms Switch-on peak current) DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl  Connectors:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2 INRUSHBedienungsanleitung DMX-RELAIS 2 INRUSHUser Manual

 DMX-Relais/Analog 1The DMX Relais/Analog 1 is designed for several kinds of controlling tasks.Potential free switch outputOne potential free switch output (normally open / NO) with up to 8A switching capacity is available.Switching contact for direct and alternating voltageThe switching contact is suitable for switching both direct voltage and alternating voltage.Analog control outputOne control output with 0-10V or 1-10V are available for control devices with analog input.For voltages from 12V up to 24VThe DMX Relais/Analog Interface 1 runs with supply voltages from 12 up to 24V direct voltage.DMX FAIL-FunctionAn adjustable DMX FAIL-Function offers the option to hold the current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX Relais/Analog Interface 1 the configuration via RDM or DMX.Several operating modesThe DMX Relais/Analog Interface 1 offers several operating modes which can be set via jumper or RDM:- Relay + Analog 8Bit 0-10V- Relay + Analog 8Bit 1-10V- Relay + Analog 10Bit 0-10V- Relay + Analog 10Bit 1-10V- Relay & Analog 8Bit 0-10V- Relay & Analog 8Bit 1-10V- Relay & Analog 10Bit 0-10- Relay & Analog 10Bit 1-10VTop hat rail mounting availableSuitable for the DMX Relais/Analog Interface 1 the DIN rail housing 350 is available as accessory. Specifications  Power supply:12-24V DC 100mA@12V / 70mA@24V  Protocol:DMX512 / RDM  DMX channels:1 or 2 channels  Output:1 switching contact NO max. 8A / 250V~ (165A@20ms Switch-on peak current) 1x analog output 0-10V / 1-10V  DMX-FAIL:Hold / 0-100%  Connectors:screw terminals  Dimensions:29,2mm x 82mm Product DownloadsDMX-Relais/Analog 1Bedienungsanleitung DMX-Relais/Analog 1User Manual

 DMX-RELAIS 8 INRUSHThe DMX-RELAIS 8 INRUSH is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct voltage (DC) or alternating voltage (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Several operation modesThe DMX-RELAIS 8 INRUSH offers several operating modes which can be set via RDM:- Hysteresis 127/128- Hysteresis 0/1- Hysteresis 100/150- Exclusive- Monostable 1SecondTop hat rail mounting availableSuitable for the DMX-RELAIS 8 INRUSH the DIN rail housing 1050 is available as accessory.Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation. Specifications  Power supply:12-24V DC (280mA @ 12V / 180mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Connectors:screw terminals  Dimensions:99mm x 82mm Product DownloadsDMX-RELAIS 8 INRUSHBedienungsanleitung DMX-RELAIS 8 INRUSHUser Manual

 DMX-Relais/Analog 4The DMX-Relais/Analog 4 is designed for switching loads of several kinds.Four potential free contacts with up to 8A switching power are available.Additional four analog outputs with 0-10V or 1-10V can be used to control systems with analog inputs.This relay outputs are suitable for switching DC or AC voltage.A DMX FAIL function hold the relays and analog states unchanged or switch off at a loss of DMX signal. Specifications  Power supply:12-24V DC / 250mA  Input:4 up to 12 DMX-channels  Output:4 switching contacts (close) each max. 8A / 250V~ (165A/20ms Switch-on peak current) 4x analog output 0-10V / 1-10V  DMX-FAIL:Hold / Off  Connectors:screw terminals  Dimensions:99 x 82mm Product DownloadsDMX-Relais/Analog 4Bedienungsanleitung DMX-Relais/Analog 4User Manual

 DMX-RELAIS 8 INRUSH+The DMX-RELAIS 8 INRUSH+ is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (Closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct current (DC) or alternating current (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD) orto adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH+ allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.Touch-ControlThe DMX-RELAIS 8 INRUSH+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status displayVia a RGB status display the DMX reception is shown.Mute able LED-DisplayThe LED-Display at the DMX-RELAIS 8 INRUSH+ can be switched off via RDM command or time-controlled,so that no disturbing light sources are present during operation.Several operation modesThe DMX-RELAIS 8 INRUSH+ offers various operation modes. Specifications  Power supply:12-24V DC (300mA @ 12V / 200mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:up to 8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Display:7 segment display RGB LED  TOUCH-Control:3 touch buttons  Connectors:screw terminals  Dimensions:105mm x 90mm x 60mm Product DownloadsDMX-RELAIS 8 INRUSH+Bedienungsanleitung DMX-RELAIS 8 INRUSH+User Manual

 ArtNet-Relais/Analog 4The ArtNet Relais/Analog Interface 4 is designed for switching loads of several kinds.4 relay and 4 analog outputsFour potential free contacts with up to 8A switching power are available.Additional four analog outputs with 0-10V or 1-10V can be used to control systems with analog inputs.DMX or Art-NetThe ArtNet Relais/Analog Interface 4 can controlled by a DMX signal or by an Art-Net (DMX over Ethernet) signal.DMX-HOLD functionA DMX-HOLD function can be activated. Then, the state of the relay and analog outputs is hold after losing the DMX signal. User-friendly ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.Power Supply for WiFi BridgeIn addition the ArtNet Relais/Analog Interface 4 has a USB connector providing a power supplywith 5V/500mA for external devices e.x. a WiFi-bridge.As WLAN-bridge we suggest: TP-Link TL-WR702N or TP-Link TL-WR802NControll with AppThe controll of this device is possible by using the free Android-App "DMX Remote".Firmware-Update-FunctionIn order to take advantage of future features, the ArtNet Relais/Analog Interface 4 has a firmware update function.This can be launched from the browser so that no access to the device is necessary!DMX4ALL-Command interfaceThe ArtNet Relais/Analog Interface 4 has another TCP communication interface.This interface uses the DMX4ALL-commands via TCP packets. Specifications  Power supply:12-24V DC / 250mA  Ethernet:RJ45  Input:4 up to 12 DMX-channels  Output:4 switching contacts each max. 8A / 250V~ (165A/20ms Switch-on peak current) 4x analog output 0-10V / 1-10V  DMX-FAIL:Hold / Off  Connectors:screw terminals  USB-connection:5V / 500mA for power supply external devices (e.g. WLAN-bridge)  Dimensions:99 x 82mm  Protocol:Art-Net ™ DMX4ALL Commands Product DownloadsArtNet-Relais/Analog Interface 4Bedienungsanleitung ArtNet-Relais/Analog Interface 4User Manual ArtNet-Relais/Analog Interface 4Firmware