DMX-RELAIS 2The DMX-RELAIS 2 is designed for switching loads of several kinds.Two potential free contacts with up to 8A switching power (resistive loads) are available.This relay interface is suitable for switching DC voltage or AC voltage.A DMX FAIL function hold the relays states unchanged or switch off at a loss of DMX signal.The following operating modes are available:Standard 2 channel Relaisinterface2 autonomous switching outputs will be activated as soon as the DMX value reaches the range 128-255.FogControl2 switching outputs controlled by a DMX-channel. Thereby output 1 is for the heating element and output 2 for the pump control. An internal timer allows the automatic fog output.Jalousie-Control2 mutual locked switching outputs, controlled by 2 DMX-channels. Thereby is only one relay switched on, if the DMX value reaches the range 128-255.ImpulseIf the DMX value goes in the range of 128-255, the corresponding output for 1 second turns on. Thereafter, the value must be return back below 128 to triggering an impulse again.DMX value not 02 autonomous switching outputs will be activated as soon as the DMX value reaches the range 1-255. Specifications  Power supply:12-24V DC / 250mA  Input:1 up to 2 DMX-channels  Output:2 switching contacts max. 8A / 250V~ (resistive loads)  DMX-FAIL:Hold / Off  Connectors:screw terminals  Dimensions:64,2 x 82mm Product DownloadsDMX-RELAIS 2Bedienungsanleitung DMX-RELAIS 2User Manual

 DMX-RELAIS 2 INRUSHThe DMX-RELAIS 2 is designed for switching loads of several kinds.Two potential free contacts with up to 8A switching power (resistive loads) are available.This relay interface is suitable for switching DC voltage or AC voltage.A DMX FAIL function hold the relays states unchanged or switch off at a loss of DMX signal.The following operating modes are available:Standard 2 channel Relaisinterface2 autonomous switching outputs will be activated as soon as the DMX value reaches the range 128-255.FogControl2 switching outputs controlled by a DMX-channel. Thereby output 1 is for the heating element and output 2 for the pump control. An internal timer allows the automatic fog output.Jalousie-Control2 mutual locked switching outputs, controlled by 2 DMX-channels. Thereby is only one relay switched on, if the DMX value reaches the range 128-255.ImpulseIf the DMX value goes in the range of 128-255, the corresponding output for 1 second turns on. Thereafter, the value must be return back below 128 to triggering an impulse again.DMX value not 02 autonomous switching outputs will be activated as soon as the DMX value reaches the range 1-255. Specifications  Power supply:12-24V DC / 250mA  Input:1 up to 2 DMX-channels  Output:2 switching contacts max. 8A / 250V~ (resistive loads)  DMX-FAIL:Hold / Off  Connectors:screw terminals  Dimensions:64,2 x 82mm Product DownloadsDMX-RELAIS 2Bedienungsanleitung DMX-RELAIS 2User Manual

 DMX-RELAIS 8 INRUSHThe DMX-RELAIS 8 INRUSH is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct voltage (DC) or alternating voltage (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Several operation modesThe DMX-RELAIS 8 INRUSH offers several operating modes which can be set via RDM:- Hysteresis 127/128- Hysteresis 0/1- Hysteresis 100/150- Exclusive- Monostable 1SecondTop hat rail mounting availableSuitable for the DMX-RELAIS 8 INRUSH the DIN rail housing 1050 is available as accessory.Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation. Specifications  Power supply:12-24V DC (280mA @ 12V / 180mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Connectors:screw terminals  Dimensions:99mm x 82mm Product DownloadsDMX-RELAIS 8 INRUSHBedienungsanleitung DMX-RELAIS 8 INRUSHUser Manual

 DMX-RELAIS 8 INRUSH+The DMX-RELAIS 8 INRUSH+ is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (Closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct current (DC) or alternating current (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD) orto adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH+ allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.Touch-ControlThe DMX-RELAIS 8 INRUSH+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status displayVia a RGB status display the DMX reception is shown.Mute able LED-DisplayThe LED-Display at the DMX-RELAIS 8 INRUSH+ can be switched off via RDM command or time-controlled,so that no disturbing light sources are present during operation.Several operation modesThe DMX-RELAIS 8 INRUSH+ offers various operation modes. Specifications  Power supply:12-24V DC (300mA @ 12V / 200mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:up to 8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Display:7 segment display RGB LED  TOUCH-Control:3 touch buttons  Connectors:screw terminals  Dimensions:105mm x 90mm x 60mm Product DownloadsDMX-RELAIS 8 INRUSH+Bedienungsanleitung DMX-RELAIS 8 INRUSH+User Manual